Analysis of Meteoroid Ablation Based on Plasma Wind-tunnel Experiments, Surface Characterization, and Numerical Simulations

Bernd Helber1, Bruno Dias1,2, Federico Bariselli1,3,4, Luiza F. Zavalan1, Lidia Pittarello5, Steven Goderis6, Bastien Soens6, Seann J. McKibbin6,7,8, Philippe Claeys6, and Thierry E. Magin1
Astrophysical Journal 876, 120 Link to Article [DOI: 10.3847/1538-4357/ab16f0 ]
1Aeronautics and Aerospace Department, von Karman Institute for Fluid Dynamics, Rhode-Saint-Genèse, Belgium
2Institute of Mechanics, Materials and Civil Engineering, Université catholique de Louvain, Louvain-la-Neuve, Belgium
3Research Group Electrochemical and Surface Engineering, Vrije Universiteit Brussel, Brussels, Belgium
4Dipartimento di Scienze e Tecnologie Aerospaziali, Politecnico di Milano, Milano, Italy
5Department of Lithospheric Research, University of Vienna, Vienna, Austria
6Analytical, Environmental, and Geo-Chemistry, Vrije Universiteit Brussel, Brussels, Belgium
7Institute of Earth and Environmental Science, University of Potsdam, Potsdam-Golm, Germany
8Geowissenschaftliches Zentrum, Georg-August-Universität Göttingen, Göttingen, Germany

Meteoroids largely disintegrate during their entry into the atmosphere, contributing significantly to the input of cosmic material to Earth. Yet, their atmospheric entry is not well understood. Experimental studies on meteoroid material degradation in high-enthalpy facilities are scarce and when the material is recovered after testing, it rarely provides sufficient quantitative data for the validation of simulation tools. In this work, we investigate the thermo-chemical degradation mechanism of a meteorite in a high-enthalpy ground facility able to reproduce atmospheric entry conditions. A testing methodology involving measurement techniques previously used for the characterization of thermal protection systems for spacecraft is adapted for the investigation of ablation of alkali basalt (employed here as meteorite analog) and ordinary chondrite samples. Both materials are exposed to a cold-wall stagnation point heat flux of 1.2 MW m−2. Numerous local pockets that formed on the surface of the samples by the emergence of gas bubbles reveal the frothing phenomenon characteristic of material degradation. Time-resolved optical emission spectroscopy data of ablated species allow us to identify the main radiating atoms and ions of potassium, calcium, magnesium, and iron. Surface temperature measurements provide maximum values of 2280 K for the basalt and 2360 K for the chondrite samples. We also develop a material response model by solving the heat conduction equation and accounting for evaporation and oxidation reaction processes in a 1D Cartesian domain. The simulation results are in good agreement with the data collected during the experiments, highlighting the importance of iron oxidation to the material degradation.


Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s