^1,2,3Giovanni Pratesi et al. (>10)
Meteoritics & Planetary Science (in Press) Open Access Link to Article [https://doi.org/10.1111/maps.70025]
¹Dipartimento di Scienze della Terra, University of Firenze, Florence, Italy
²Fondazione PARSEC, Prato, Italy
³INAF—Istituto di Astrofisica e Planetologia Spaziali, Rome, Italy
Published by arrangement with John Wiley & Sons

On the evening of February 14, 2023, at 17:58 UT, a fireball was detected by three cameras of the Italian PRISMA network (FRIPON network). The first samples of the Matera meteorite, collected 3 days after the fall, lay on the balcony of a private home. Meanwhile, four samples weighing more than 10 g (including the main mass of 46.21 g) and many minor samples (less than 10 g each) were recovered, with a total mass of 117.5 g. The analyses show that Matera is a monomict chondrite breccia, exhibiting no weathering (W0) and shock (S1). Based on the mineral compositions of olivine and low-Ca pyroxene (Fa_18.0±0.3 and Fs_17.0±0.3, respectively), the rock is an H-group ordinary chondrite. Since all low-Ca pyroxene is orthoenstatite, an H5-type classification is appropriate; although texturally, a type 4 classification could be assigned to distinct portions of the rock with well-defined chondrules. The analyzed oxygen isotopes also align with an H chondrite (δ¹⁷O‰ = 2.750 ± 0.051; δ¹⁸O‰ = 4.036 ± 0.103; Δ¹⁷O‰ = 0.650 ± 0.004). X-ray tomography and a structured light 3D scanner yielded a mean bulk density of 2.87 ± 0.04 g cm⁻³, whereas ideal gas pycnometry yielded grain densities of 3.47 ± 0.05 g cm⁻³, resulting in a porosity of 17.2 ± 1.2 vol%. The magnetic susceptibility of this meteorite is log χ = 5.46 ± 0.05. The radionuclides and fireball observations suggest that the Matera meteoroid was relatively small (with a maximum radius of 20 cm, though more likely around 15 cm). This datum is also consistent with (²¹Ne/²²Ne)_cos, which suggests the origin of Matera samples from the uppermost cm of a small meteoroid, ≤10 cm radius. Different from many other H chondrites, the transfer time in space for Matera, based on 3 He alone, is 10–12 Ma. Moreover, the Matera meteorite does not contain solar wind gases. In conclusion, the Matera meteorite is not a fairly typical ordinary chondrite, due to its low bulk density and high total porosity. The presence of ordinary chondrites with these physical characteristics must be taken into account during the asteroid modeling process, as in the case of the Didymos–Dimorphos binary system.

^1,2Laura E. Jenkins,¹Martin R. Lee,^1,3,4Luke Daly,⁵Ashley J. King,¹Peter Chung,¹Sammy Griffin,⁶Shijie Li
The American Mineralogist 110, 1238-1248 Link to Article [https://doi.org/10.2138/am-2024-9389]
¹School of Geographical and Earth Sciences, University of Glasgow, Glasgow G12 8QQ, U.K.
²Diamond Light Source, Harwell Science and Innovation Campus, Fermi Avenue, Didcot OX11 0DE, U.K.
³Australian Centre for Microscopy and Microanalysis, University of Sydney, Camperdown, New South Wales 20250, Australia
⁴Department of Materials, University of Oxford, Oxford OX1 3PH, U.K.
⁵Planetary Materials Group, Natural History Museum, London SW7 5BD, U.K.
⁶Lunar and Planetary Science Research Center, Institute of Geochemistry, Chinese Academy of Sciences, Guiyang 550081, China
Copyright: The Mineralogical Society of America

A hydrous Ca-Fe-rich silicate identified as hydroandradite was observed in the “Mighei-type” carbonaceous (CM) chondrite falls, Shidian and Kolang. This is the first report of hydroandradite occurring within meteorites. Hydroandradite forms through aqueous calc-silicate alteration under specific fluid conditions. Its presence within Shidian and Kolang has implications for interpreting alteration processes within the C-complex asteroid parent bodies of the CM chondrites. To better understand its occurrence, the meteoritic hydroandradite was studied with scanning electron microscopy, electron probe microanalysis, transmission electron microscopy, and Raman spectroscopy. It occurs in four petrographic contexts: layered, perovskite-associated, sulfide-associated, and spheroidal. Kolang has all four morphologies, while only the sulfide-associated occurs in Shidian. In Kolang, hydroandradite was likely produced by replacement of kamacite, Ti-bearing clinopyroxene in calcium- and aluminum-rich inclusions, and secondary magnetite in three distinct alteration events. The formation temperature of meteoritic hydroandradite was estimated to be 100–245 °C, based on the mineralogy of the lithologies within which it occurs as well as on its degree of hydration relative to synthetic and terrestrial hydroandradites. Because Kolang and Shidian are the only reported meteorites with hydroandradite to date, they may be from the same parent body.

¹Simon Stapperfend,²Donald B. Dingwell,²Kai-Uwe Hess,³Jennifer Sutherland,⁴Axel Müller,²Dirk Müller,²Michael Eitel,¹Julian Baasch,¹Stefan Linke,¹Enrico Stoll
American Mineralogist 110, 1171-1185 Open Access Link to Article [https://doi.org/10.2138/am-2023-9263]
¹Chair of Space Technology, Technische Universität Berlin, Marchstr. 12-14, 10587 Berlin,
Germany
²Earth and Environmental Sciences, Ludwig-Maximilians-Universität München, Theresienstraße 41/III, 80333 München, Germany
³Institut Laue-Langevin, 71 Av. des Martyrs, 38000 Grenoble, France
⁴OHB System AG, Manfred-Fuchs-Str. 1, 82234 Weßling, Germany
Copyright: The Mineralogical Society of America

In the context of evaluating lunar construction options, this study focuses on characterizing the viscosities and glass transition properties of lunar regolith simulants to support the development of additive manufacturing processes using molten regolith. Employing the modular TUBS lunar regolith simulant system, we measured the viscosities of different simulants through high-temperature experiments conducted between 1051 and 1490 °C using concentric cylinder viscometry in air. Additionally, differential scanning calorimetry (DSC) was utilized to evaluate the glass transition temperatures, which were in the range between 689 and 815 °C. The measured viscosity data were parameterized by the Vogel-Fulcher-Tammann (VFT) equation, which is adept at describing the viscosities and related properties of silicate liquids. The measured viscosities were compared with the predicted values of six viscosity models. The model by Sehlke and Whittington (2016) best predicts the viscosities of the tested lunar regolith simulants at superliquidus temperatures, and no model adequately predicts viscosities at the glass transition temperature, indicating a need for further research in this area. We infer that 3D printing technologies based on molten lunar regolith are, viscosity-wise, best constrained to highland regions. The reduced environment on the Moon influences the 3D printing process in a positive manner.

¹L. G. Vacher,¹V. T. H. Phan,¹L. Bonal,²M. Iskakova,¹O. Poch,¹P. Beck,¹E. Quirico,²R. C. Ogliore
Meteoritics & Planetary Science (in Press) Link to Article [https://doi.org/10.1111/maps.70019]
¹CNRS IPAG, Univ. Grenoble Alpes, Grenoble, France
²Department of Physics, Washington University in St. Louis, St. Louis, Missouri, USA
Published by arrangement with John Wiley & Sons

C-type asteroids, such as asteroid (162173) Ryugu, may have played a key role in delivering light elements to early Earth. Nitrogen (N)-bearing molecules have been chemically identified in some Ryugu grains, and based on the faint 3.06 μm absorption band observed by the hyperspectral microscope MicrOmega, NH-bearing compounds seem to be spread at the global scale in the collection. However, the chemical forms of these NH-bearing compounds—whether organic molecules, ammonium (NH4+) salts, NH4+- or NH-organics-bearing phyllosilicates, or other forms—remain to be better understood. In this study, we report the characterization of two Ryugu particles (C0050 and C0052) using infrared spectroscopy at millimeter, micrometer, and nanometer scales, along with NanoSIMS techniques to constrain the nature and origin of NH-bearing components in the Ryugu asteroid. Our findings show that Ryugu’s C0052 particle contains rare (~1 vol%), micrometer-sized NH-rich organic compounds with peaks at 1660 cm−1 (mainly due to C=O stretching of the amide I band) and 1550 cm−1 (mainly due to N-H bending vibration mode of the amide II band), indicative of amide-related compounds. In contrast, these compounds are absent in C0050. Notably, N isotopic analysis reveals that these amides in C0052 are depleted in 15N (δ15N ≃ −200‰), confirming their indigenous origin, while carbon (C) and hydrogen (H) isotopic compositions are indistinguishable from terrestrial values within errors. The amides detected in C0052 could have formed through hydrothermal alteration from carboxylic acids and amines precursors on Ryugu’s parent planetesimal. Alternatively, they could have originated from the irradiation of 15N-depleted N-bearing ice by ultraviolet light or galactic cosmic rays, either at the surface of the asteroid in the outer Solar System or on the mantle of interstellar dust grains in the interstellar medium. Amides delivered to early Earth by primitive small bodies such as asteroid Ryugu may have contributed to the prebiotic chemistry.

¹Konstantin M. Ryazantsev,¹Marina A. Ivanova,²Alexander N. Krot,³Chi Ma,¹Cyril A. Lorenz,⁴Vasily D. Shcherbakov
Meteoritics & Planetary Science (in Press) Link to Article [https://doi.org/10.1111/maps.70020]
¹Vernadsky Institute of Geochemistry of the Russian Academy of Sciences, Moscow, Russia
²Hawai‘i Institute of Geophysics and Planetology, School of Ocean and Earth Science and Technology, University of Hawai‘i at Mānoa, Honolulu, Hawai‘i, USA
³Division of Geological and Planetary Sciences, California Institute of Technology, Pasadena, California, USA
⁴Department of Geology, Lomonosov Moscow State University, Moscow, Russia
Published by arrangement with John Wiley & Sons

Ultrarefractory Ca,Al-rich inclusions (UR CAIs) in the Sayh al Uhaymir (SaU) 290 CH3 carbonaceous chondrite consist of ultrarefractory Zr,Sc-rich minerals (allendeite, kangite, tazheranite, warkite, and Y-perovskite), grossite, grossmanite, hibonite, melilite, and spinel. Several of them have a core–mantle structure with ultrarefractory minerals concentrated in the core. The unfragmented inclusions are surrounded by layers of spinel, melilite, Sc-diopside, and diopside (not all layers are present around individual inclusions). The UR CAIs have uniform ¹⁶O-rich compositions: Most inclusions have Δ¹⁷O of ~ −23 ± 2‰; a grossite-rich CAI is slightly ¹⁶O-depleted (Δ¹⁷O ~ −17‰). The CAIs are highly enriched in Zr, Hf, Sc, Y, and Ti compared to typical and previously studied UR CAIs from CM2, CO3, and CV3 carbonaceous chondrites. Similar to UR CAIs from other chondrites, the ultrarefractory minerals in SaU 290 CAIs are enriched in heavy rare earth elements (HREEs) relative to more volatile light rare earth elements (LREEs). We conclude that (1) UR CAIs from SaU 290 formed by gas–solid condensation from a gaseous reservoir having variable but mostly solar-like O-isotope composition, most likely near the proto-Sun, and were subsequently transported outward to the accretion region of CH chondrites. (2) The UR oxides and silicates are important carriers of UR REE patterns recorded their possible early fractionation.

¹Tahnee Burke,¹Andrew G. Tomkins,²Zsanett Pinter,³Andrew D. Langendam,⁴Laura A. Miller
Meteoritics & Planetary Science (in Press) Open Access Link to Article [https://doi.org/10.1111/maps.70016]
¹School of Earth, Atmosphere and Environment, Monash University, Melbourne, Victoria, Australia
²CSIRO Mineral Resources, Microbeam Laboratory, Clayton, Victoria, Australia
³ANSTO-Australian Synchrotron, Clayton, Victoria, Australia
⁴Research School of Earth Sciences, Australian National University, Canberra, Australian Capital Territory, Australia
Published by arrangement with John Wiley & Sons

The phosphates, apatite and merrillite, are accessory phases in all martian meteorites. Although apatite is commonly used to assess volatile content and speciation in martian meteorites, merrillite is at least twice as abundant in most samples, but poorly understood. Given that shergottites are divided into enriched, intermediate, and depleted subgroups based on bulk differences in light rare earth element (LREE) abundance and isotopic compositions, an understanding of phosphate mineral behavior is essential to deciphering the petrogenetic differences between these groups because they are the main REE-bearing phases. This study examines 10 enriched shergottites, six intermediate shergottites, and four depleted shergottites to investigate systematic variations in phosphate mineralogy and geochemistry. Two nakhlites, a chassignite, ALH 84001, and two pairs of NWA 7034 were also examined to cover all martian meteorite types known to date. Fourteen of the shergottites were previously classified into enriched, intermediate, and depleted subgroups based on bulk rock REE trends and La/Yb ratios. The remaining six shergottites had not been subgrouped during classification. All samples were elementally mapped using the XFM beamline at the Australian Synchrotron, which provided the relative abundance of merrillite, apatite, K-feldspar, and maskelynite within each sample (the same can be achieved with electron microprobe or SEM). We show that it is possible to classify shergottites from a single representative thin section using apatite to merrillite ratios (A10/M, where A10 is apatite abundance × 10) and K-feldspar to phosphate ratios (K10/P, where K10 is K-feldspar abundance × 10). Enriched shergottites typically have A10/M of 1.08 to 8.72 and K10/P of 1.85 to 13.34; intermediate shergottites have A10/M ranging from 0.5 to 0.96 and K10/P of 0.36 to 0.94; and depleted shergottites have A10/M ranging from 0.26 to 0.42 and K10/P of 0.09 to 0.39. Calculating these ratios thus provides a quick and straightforward method of chemically classifying shergottites that avoids the need to destroy samples for bulk rock REE analysis.

^1,2Malika Singhal,³Himela Moitra,⁴Souvik Mitra,⁵Aurovinda Panda,⁵Jayant Kumar Yadav,⁵D. Srinivasa Sarma,⁵Devender Kumar,¹Naveen Chauhan,³Saibal Gupta,¹Ashok Kumar Singhvi
Meteoritics & Planetary Science (in Press) Link to Article [https://doi.org/10.1111/maps.70021]
¹Atomic and Molecular Physics Division, Physical Research Laboratory, Ahmedabad, India
²Indian Institute of Technology, Gandhinagar, Palaj, India
³Department of Geology and Geophysics, Indian Institute of Technology, Kharagpur, India
⁴Department of Geology, Presidency University, Kolkata, India
⁵CSIR-National Geophysical Research Institute, Hyderabad, India
Published by arrangement with John Wiley & Sons

In this study, naturally occurring jarosite samples from Kachchh, India (considered to be Martian analogue) were characterized using Fourier Transform Infrared Spectroscopy (FTIR), Cathodoluminescence–Energy Dispersive X-ray Spectroscopy (CL-EDXS), and Luminescence (thermoluminescence [TL], blue and infrared stimulated luminescence [BSL and IRSL]) methods. FTIR and CL-EDXS studies suggested that jarosite preserves its luminescence characteristics even after annealing the samples to 450°C. This facilitated luminescence studies (TL/BSL/IRSL) to assess the potential use of luminescence-dating methods to establish the chronology of jarosite formation or its transport. Jarosite exhibited TL, BSL, and IRSL signals with varied sensitivities. The TL glow curve of jarosite comprised glow peaks at 100, 150, 300, and 350°C, reproducible over multiple readout cycles. The least bleachable TL glow peak at 350°C is reduced to (1/e)th of its glow peak intensity (i.e., 36%) with ~100 min of light exposure under a sunlamp. BSL and IRSL optical decay signals comprised three components. These signals exhibited athermal fading of g ~ 6%/decade, but pIRIR signal at 225°C showed a near zero fading. The saturation doses (2D0) ranged from 700 Gy to 2600 Gy for different signals, which suggests a dating range of ~25 ka using a reported Martian total dose rate of 65 Gy/ka, primarily due to cosmic rays. Multiple TL glow peaks and their widely differing stability also offer promise to discern changes in cosmic ray fluxes over a century to millennia time scale through inverse modeling and laboratory experiments.

¹Hiroto Tokumon, ¹Yohei Noji, ²Keisuke Fukushi, ^2,3Yasuhito Sekine
Geochimica et Cosmochimica Acta (in Press) Link to Article [https://doi.org/10.1016/j.gca.2025.07.021]
¹Division of Natural System, Graduate School of Natural Science, Kanazawa University, Kakuma, Kanazawa, Ishikawa 920-1192, Japan
²Institute of Nature and Environmental Technology, Kanazawa University, Kakuma, Kanazawa, Ishikawa 920-1192, Japan
³Earth-Life Science Institute (ELSI), Institute of Science Tokyo, Meguro, Tokyo 152-8550, Japan
Copyright Elsevier

A key step in understanding prebiotic chemistry in the Solar System is to predict and reconstruct the speciation and solid–liquid partitioning of inorganic nitrogen species, such as ammonium and ammonia, in icy planetesimals—including C-type asteroids, the dwarf planet Ceres, and Saturn’s moon Enceladus. Smectite, a common constituent of these bodies, can regulate the chemical behavior of NH₄⁺ through cation exchange reactions. Accurate reconstruction of ammonium and ammonia speciation and distribution therefore requires appropriate selectivity coefficients for these exchange processes. In this study, we measured the NH₄⁺–Na⁺ selectivity coefficients (K_Na-NH4) of montmorillonite and saponite under varying initial NH₄⁺ and Na⁺ concentration, solid concentration, and pH. Cation exchange was confirmed by stoichiometric NH₄⁺ uptake and Na⁺ release. Montmorillonite exhibited log K_Na-NH4 ranging from −0.06 to 0.41, while saponite showed systematically lower values, from −0.46 to 0.07, likely reflect a difference in hydration retention capacity between the two smectites. Selectivity coefficients for both smectites showed a pH dependence with a maximum around pH 8, and well-described by second-order polynomial fits. Speciation modeling incorporating these coefficients demonstrates that NH₄⁺ interlayer occupancy and the aqueous concentrations of NH₄⁺ and NH₃ are highly sensitive to pH, salinity, and water–rock ratio under plausible geochemical conditions. Modeling results suggest that the aqueous solutions surrounding the Ryugu and Bennu samples during aqueous alteration were highly alkaline (pH > 9.5), favoring NH₃ over NH₄⁺ in solution and resulting in limited NH₄⁺ retention on solids. In the ancient Ceres ocean, NH₄⁺ was abundant in solution due to moderately alkaline conditions (pH ∼ 8) and a high water–rock ratio. For Enceladus, the results indicate that its rocky core may serve as a reservoir of NH₄⁺, with up to 60–70 % of total NH₃ in Enceladus present as interlayer NH₄⁺. These findings provide a quantitative framework for interpreting nitrogen speciation in icy Solar System bodies, including Europa, and their returned or observed materials.

¹Martin R. Lee,²Tobias Salge,¹Ian Maclaren
Meterotics & Planetary Science (in Press) Open Access Link to Article [https://doi.org/10.1111/maps.70018]
¹School of Geographical and Earth Sciences, University of Glasgow, Glasgow, UK
²Imaging and Analysis Centre, Natural History Museum, London, UK
Published by arrangement with John Wiley & Sons

Hydrous Mg-phosphate was first described from astromaterials in particles returned from the C-type asteroid Ryugu, and has subsequently been found in samples of the B-type asteroid Bennu and CI1 carbonaceous chondrites. This phase may have been highly significant as a source of bioessential compounds for early Earth. Here, we describe Mg-phosphate from a petrologic type 1 clast (called “C1MP”) in the Cold Bokkeveld CM2 carbonaceous chondrite. This clast has a fine-grained serpentine–saponite matrix that in addition to the Mg-phosphate contains magnetite, Mg-Fe carbonate, calcite, pentlandite, transjordanite, eskolite, and daubréelite/zolenskyite. The Mg-phosphate grains are 7–36 μm in size and together constitute 0.27% of the clast by area. They have a “cracked” texture in scanning electron microscope images, and scanning transmission electron microscopy (STEM) shows that they are highly porous suggesting alteration of originally hydrous grains. The Mg-phosphate has Mg/P and Na/P ratios (atom%) of 1.02 and 0.25, respectively, along with minor concentrations of C, S, Cl, K, Ca, and Fe. Nitrogen was sought because ammonia has been reported from Ryugu Mg-phosphate, but none was detected by X-ray or electron spectroscopy. 4D-STEM shows that the C1MP clast’s Mg-phosphate is amorphous, and radial distribution function analysis of electron diffraction patterns reveals that its P-O and Mg-P bonding distances are comparable to newberyite (MgHPO4.3H2O). The C1MP clast’s Mg-phosphate formed from late-stage alkaline brines and subsequently underwent dehydration, amorphization, and partial loss of Na in response to heating in its parent body and/or during laboratory analysis.

¹Xhonatan Shehaj et al. (>10)
Earth, Planets and Space 77, 108 Open Access Link to Article [DOI https://doi.org/10.1186/s40623-025-02245-2]
¹Dipartimento di Fisica, Università degli Studi di Trento, Trento, Italy

We currently do not have a copyright agreement with this publisher and cannot display the abstract here