^1,2Shurui Chen et al. (>10)
Icarus (in Press) Link to Article [https://doi.org/10.1016/j.icarus.2024.116256]
¹College of Surveying & Geo-Informatics, Tongji University, Shanghai 200092, China
²The Shanghai Key Laboratory of Space Mapping and Remote Sensing for Planetary Exploration, Tongji University, Shanghai 200092, China
Copyright Elsevier

Exploring the concealed subsurface structures and materials beneath the lunar surface can reveal significant insights into geological history. This study offers a comprehensive analysis of the stratigraphic interpretation and subsurface material composition at the Chang’E-4 landing site, integrating both in-situ and orbital radar with multispectral datasets. We report the identification of a subsurface structure, which resembles a buried impact crater (~420 m in diameter) under the Yutu-2 rover’s path. This crater could degrade over a period of 0.42 to 0.53 Ga, with an initial diameter of 293 to 323 m and an initial depth of 45.9 to 51.4 m. Surface material above the buried crater, evaluated by the in-situ visible and near-infrared imaging spectrometer (VNIS) detector, shows a higher abundance of clinopyroxene compared to surrounding areas, where a near-equal mix of clinopyroxene and orthopyroxene is observed. Assessment of crater diameters in proximity to the Chang’E-4 landing site, along with the mineral compositions at their epicenters, reveals a decrease in the abundance of clinopyroxene and plagioclase with depth. Conversely, the quantities of orthopyroxene and olivine increase, implying that clinopyroxene-rich Finsen ejecta significantly influenced the Chang’E-4 landing site’s geological composition. Two potential stratigraphic boundary depths are identified at 13.5 and 22 m, based on pronounced variations in mineral abundance, offering fresh insights into subsurface delineation beyond radar data. Considering the VNIS and vertical mineral composition, we propose the buried crater’s formation resulted from Finsen crater’s ejecta. Also, we identify eight potential historical impacts by comparing subsurface relief variations with mineral composition ratios between clinopyroxene and orthopyroxene. The integration of subsurface structure, along with surface and subsurface mineral composition, enables a more robust stratigraphic interpretation, facilitates shallow material source analysis, and allows for historical impact tracing.

¹Philipp Zanon,¹Michelle Dunn, ¹Geoffrey Brooks
Icarus (in Press) Open Access Link to Article [https://doi.org/10.1016/j.icarus.2024.116257]
¹Swinburne University of Technology, John St, Hawthorn, Melbourne, 3122, Victoria, Australia
Copyright Elsevier

The detrimental effects and challenges of Lunar dust for Lunar exploitation were first identified during the Apollo missions. During the extra vehicle activities (EVAs) undertaken by astronauts, the dust clogged mechanisms, disrupted sensors, and caused several health issues for the astronauts. Despite numerous studies, there is no definite understanding as to why different Apollo missions experienced varying levels of dust disruptions. The variations in dust behavior could be attributed to the amount of radiation the Lunar soil is exposed to, as well as mineralogy and particle sizes. To enhance our understanding of Lunar dust behavior this study investigated Space Recourse Technologies, formally known as Exolith, simulant at different mineral compositions, and their surface detachment characteristics were measured. Experiments measuring the individual minerals and their mixed simulant-like counterparts were conducted using electrostatic fields. Inclusive to this, non-dried and dried samples were compared by measuring adhesion to target plates when subject to electrostatic forces. The results found that Highlands simulant exhibited a higher buildup on a target plate than its Mare counterpart by an average of 33% under the same conditions, likely due to particle size differences. In addition to these findings, evidence of particle reactivity decay was observed under repeated tests with up to 60% less Mare simulant and 36% Highlands deposition being measured compared to the first set of experiments. A possible explanation may be particle reactivity. Microscope images identified that particles are transported in groups as opposed to individual grains. These results will help researchers in tailoring dust mitigation solutions based on different regions on the Lunar surface and influence mission planning from the perspective of dust mitigation and contamination.