¹Siddharth Hegde,²Ivan G. Paulino-Lima,³Ryan Kent,^1,4Lisa Kaltenegger,⁵Lynn Rothschild
¹Max Planck Institute for Astronomy, Heidelberg 69117, Germany;
²National Aeronautics and Space Administration Postdoctoral Program Fellow, National Aeronautics and Space Administration Ames Research Center, Moffett Field, CA 94035;
³University of California, Santa Cruz University Affiliated Research Center, National Aeronautics and Space Administration Ames Research Center, Moffett Field, CA 94035;
⁴Institute for Pale Blue Dots, Department of Astronomy, Cornell University, Ithaca, NY 14853; and
⁵National Aeronautics and Space Administration Ames Research Center, Moffett Field, CA 94035

Exoplanet discovery has made remarkable progress, with the first rocky planets having been detected in the central star’s liquid water habitable zone. The remote sensing techniques used to characterize such planets for potential habitability and life rely solely on our understanding of life on Earth. The vegetation red edge from terrestrial land plants is often used as a direct signature of life, but it occupies only a small niche in the environmental parameter space that binds life on present-day Earth and has been widespread for only about 460 My. To more fully exploit the diversity of the one example of life known, we measured the spectral characteristics of 137 microorganisms containing a range of pigments, including ones isolated from Earth’s most extreme environments. Our database covers the visible and near-infrared to the short-wavelength infrared (0.35–2.5 µm) portions of the electromagnetic spectrum and is made freely available from biosignatures.astro.cornell.edu. Our results show how the reflectance properties are dominated by the absorption of light by pigments in the visible portion and by strong absorptions by the cellular water of hydration in the infrared (up to 2.5 µm) portion of the spectrum. Our spectral library provides a broader and more realistic guide based on Earth life for the search for surface features of extraterrestrial life. The library, when used as inputs for modeling disk-integrated spectra of exoplanets, in preparation for the next generation of space- and ground-based instruments, will increase the chances of detecting life.

Reference
Hegde S, Paulino-Lima IG, Kent R, Kaltenegger L, Rothschild L (2015) Surface biosignatures of exo-Earths: Remote detection of extraterrestrial life. Proceedings of the National Academy of Sciences 112, 3886–3891
Link to Article [doi: 10.1073/pnas.1421237112]

¹M. Campbell-Brown
¹University of Western Ontario, Department of Physics and Astronomy, London, ON, Canada N6A 3K7 +15196612111

We currently do not have a copyright agreement with this publisher and cannot display the abstract here

Reference
Campbell-Brown M (2015) A population of small refractory meteoroids in asteroidal Orbits. Planetary and Space Science (in Press)
Link to Article [doi:10.1016/j.pss.2015.03.022]

¹Deepak Dhingra,¹Carle M. Pieters,¹James W. Head
¹Earth, Environmental and Planetary Sciences, Brown University, Brook Street, Box 1846, Providence, RI 02912, USA

Multiple origins for olivine-bearing lithologies at Copernicus crater are recognized based on integrated analysis of data from Chandrayaan-1 Moon Mineralogy Mapper (M3), Lunar Reconnaissance Orbiter (LRO) Narrow Angle Camera (NAC) and Kaguya Terrain Camera (TC). We report the diverse morphological and spectral character of previously known olivine-bearing exposures as well as the new olivine occurrences identified in this study. Prominent albedo differences exist between olivine-bearing exposures in the central peaks and a northern wall unit (the latter being ∼40% darker). The low-albedo wall unit occurs as a linear mantling deposit and is interpreted to be of impact melt origin, in contrast with the largely unmodified nature of olivine-bearing peaks. Small and localized occurrences of olivine-bearing lithology have also been identified on the impact melt-rich floor, representing a third geologic setting (apart from crater wall and peaks). Recent remote sensing missions have identified olivine-bearing exposures around lunar basins (e.g. Yamamoto et al., 2010, Pieters et al., 2011 and Kramer et al., 2013) and at other craters (e.g. Sun and Li, 2014), renewing strong interest in its origin and provenance. A direct mantle exposure has commonly been suggested in this regard. Our detailed observations of the morphological and spectral diversity in the olivine-bearing exposures at Copernicus have provided critical constraints on their origin and source regions, emphasizing multiple formation mechanisms. These findings directly impact the interpretation of olivine exposures elsewhere on the Moon. Olivine can occur in diverse environments including an impact melt origin, and therefore it is unlikely for all olivine exposures to be direct mantle occurrences as has generally been suggested.

Reference
Dhingra D, Pieters CM, Head JW (2015) Multiple origins for olivine at Copernicus crater. Earth and Planetary Science Letters 420, 95–101
Link to Article [doi:10.1016/j.epsl.2015.03.039]

Copyright Elsevier

¹Martin Schiller,¹James N. Connelly,¹Aslaug C. Glad,²Takashi Mikouchi,¹Martin Bizzarro
¹Centre for Star and Planet Formation, University of Copenhagen, Øster Voldgade 5-7, DK-1350, Denmark
²Department of Earth & Planetary Science, University of Tokyo, Tokyo, Japan

The mechanisms and timescales of accretion of 10–1000 km sized planetesimals, the building blocks of planets, are not yet well understood. With planetesimal melting predominantly driven by the decay of the short-lived radionuclide 26Al (26Al→26Mg; t1/2=0.73 Mat1/2=0.73 Ma), its initial abundance determines the permissible timeframe of planetesimal-scale melting and its subsequent cooling history. Currently, precise knowledge about the initial 26Al abundance [(26Al/27Al)0] exists only for the oldest known solids, calcium aluminum-rich inclusions (CAIs) – the so-called canonical value. We have determined the 26Al/27Al of three angrite meteorites, D’Orbigny, Sahara 99555 and NWA 1670, at their time of crystallization, which corresponds to (3.98±0.15)×10−7(3.98±0.15)×10−7, (3.64±0.18)×10−7(3.64±0.18)×10−7, and (5.92±0.59)×10−7(5.92±0.59)×10−7, respectively. Combined with a newly determined absolute U-corrected Pb–Pb age for NWA 1670 of 4564.39±0.24 Ma4564.39±0.24 Ma and published U-corrected Pb–Pb ages for the other two angrites, this allows us to calculate an initial (26Al/27Al)0 of View the MathML source(1.33−0.18+0.21)×10−5 for the angrite parent body (APB) precursor material at the time of CAI formation, a value four times lower than the accepted canonical value of 5.25×10−55.25×10−5. Based on their similar 54Cr/52Cr ratios, most inner solar system materials likely accreted from material containing a similar 26Al/27Al ratio as the APB precursor at the time of CAI formation. To satisfy the abundant evidence for widespread planetesimal differentiation, the subcanonical 26Al budget requires that differentiated planetesimals, and hence protoplanets, accreted rapidly within 0.25±0.15 Ma0.25±0.15 Ma of the formation of canonical CAIs.

Reference
Schiller M, Connelly JN, Glad AC, Mikouchi T, Bizzarro M (2015) Early accretion of protoplanets inferred from a reduced inner solar system 26Al inventory. Earth and Planetary Science Letters 420, 45–54.
Link to Article [doi:10.1016/j.epsl.2015.03.028]

Copyright Elsevier

¹Corentin Le Guillou,²Hitesh G. Changela,²Adrian J. Brearley
¹Institut für Geologie, Mineralogie und Geophysik, Ruhr-Universität Bochum, Bochum, Germany
²Department of Earth and Planetary Sciences, University of New Mexico, Albuquerque, NM 87131, USA

The CR chondrites carry one of the most pristine records of the solar nebula materials that accreted to form planetesimals. They have experienced very variable degrees of aqueous alteration, ranging from incipient alteration in their matrices to the complete hydration of all of their components. In order to constrain their chemical alteration pathways and the conditions of alteration, we have investigated the mineralogy and Fe oxidation state of silicates in the matrices of 8 CR chondrites, from type 3 to type 1. Fe-L edge X-ray Absorption Near Edge Structure (XANES) was performed on matrix FIB sections using synchrotron-based scanning transmission X-ray microscopy (STXM). The Fe3+/∑FeFe3+/∑Fe ratio of submicron silicate particles was obtained and coordinated with TEM observations.
In all the least altered CR chondrites (QUE 99177, EET 87770, EET 92042, LAP 02342, GRA 95229 and Renazzo), we find that the matrices consist of abundant submicron Fe-rich hydrated amorphous silicate grains, mixed with nanometer-sized phyllosilicates. The Fe3+/∑FeFe3+/∑Fe ratios of both amorphous and nanocrystalline regions are very high with values ranging from 68 to 78%. In the most altered samples (Al Rais and GRO 95577), fine-grained phyllosilicates also have a high Fe3+/∑FeFe3+/∑Fe ratio (around 70%), whereas the coarse, micrometer-sized phyllosilicates are less oxidized (down to 55%) and have a lower iron content.
These observations suggest the following sequence: submicron Fe2+-amorphous silicate particles were the building blocks of CR matrices; after accretion they were quickly hydrated and oxidized, leading to a metastable, amorphous gel-like phase. Nucleation and growth of crystalline phyllosilicates was kinetically-limited in most type 3 and 2 CRs, but increased as alteration became more extensive in Al Rais and GRO 95577. The decreasing Fe3+/∑FeFe3+/∑Fe ratio is interpreted as a result of the transfer of Fe3+ from silicates to oxides during growth, while aqueous alteration progressed (higher temperature, longer duration, change of fluid composition). In a fully closed system, equilibrium thermodynamics suggest that the water to rock ratios, typically assumed to be low (<1) for chondrites, should primarily control the iron valency of the silicates and predict a lower Fe3+/∑FeFe3+/∑Fe ratio. Such a high Fe3+/∑FeFe3+/∑Fe value could be accounted for, however, if the system was partially open, at least with respect to H2 (and other gases as well). Rapid degassing of the fluid would have favored more oxidizing fluid conditions. Recently proposed scenarios involving some degree of water D/H increase through Rayleigh isotopic fractionation are supported by these results.

Reflectance
Le Guillou C, Changela HG, Brearley AJ (2015) Widespread oxidized and hydrated amorphous silicates in CR chondrites matrices: Implications for alteration conditions and H2 degassing of asteroids. Earth and Planetary Science Letters (in Press)
Link to Article [doi:10.1016/j.epsl.2015.02.031]

Copyright Elsevier

^1,2,3,4Johan Villeneuve, ^1,5,6Guy Libourel,¹Camille Soulié
¹CRPG-Université de Lorraine, CNRS, UMR 7358, 15 Rue Notre-Dame des Pauvres, BP20, 545401 Vandoeuvre-lès-Nancy, France
²Université d’Orléans, ISTO, UMR 7327, 45071 Orléans, France
³CNRS/INSU, ISTO, UMR 7327, 45071 Orléans, France
⁴BRGM, BP 36009, 45060 Orléans, France
⁵Ecole Nationale Supérieure de Géologie – Université de Lorraine, Rue du Doyen Marcel Roubault, BP40, 54501, Vandoeuvre-lès-Nancy, France
⁶Geoazur, OCA, Université de Nice – Sophia Antipolis, CNRS/IRD, 250 rue Albert Einstein, Sophia Antipolis, 06560 Valbonne, France

In unequilibrated chondrites, the ferromagnesian silicates in chondrules exhibit wide ranges of mg# = Mg/(Mg + Fe), allowing to sub-divide porphyritic chondrules into either type I (mg# > 0.9) or type II (mg# < 0.9). Although both chondrule types formed under oxidizing conditions relative to the canonical solar nebula, it is generally inferred that type II chondrules formed in more oxidizing conditions than type I. In order to check whether this redox difference was established during chondrule formation, or reflects differences in their precursors, we have undertaken a set of experiments aimed at heating type I olivine-rich (A) chondrule proxy, i.e. forsterite + Fe metal + Ca-Mg-Si-Al glass mixtures, under oxidizing conditions. We show that high temperature (isothermal) oxidation of type IA-like assemblages is a very efficient and rapid process (e.g., few tens of minutes) to form textures similar to type IIA chondrules. Due to the rapid dissolution of Fe metal blebs, a FeO increase in the melt and in combination with the dissolution of magnesian olivine allows the melt to reach ferroan olivine saturation. Crystallization of ferroan olivine occurs either as new crystal in the mesostasis or as overgrowths on the remaining unresorbed forsterite grains (relicts). Interruption of this process at any time before its completion by rapid cooling allows to reproduce the whole range of textures and chemical diversity observed in type A chondrules, i.e., from type I to type II.

Several implications on chondrule formation processes can be inferred from the presented experiments. Type I chondrules or fragments of type I chondrules are very likely the main precursor material involved in the formation of most type II chondrules. Formation of porphyritic olivine type II chondrules is very likely the result of processes generating crystal growth by chemical disequilibrium at high temperature rather than processes generating crystallization only by cooling rates. This questions the reliability of chondrule thermal history (e.g., cooling rate values) hitherto inferred for producing porphyritic textures from dynamical cooling rate experiments only. Type A chondrule formation can be a very fast process. After periods of sub-isothermal heating or slow cooling (< 50 K/h) as short as several tens of minutes and no longer than few hundreds of minutes at 1500 -1800°C, type A chondrules terminates their formation by a fast cooling (> 103-104 K/h) in order to preserve their glassy mesostasis. Such inferred thermal history being at odds with nebular shock models, we thus advocate that impacts on planetesimals causing rapid melting and vaporization may provide the high density and highly volatile-enriched gaseous environments required to form chondrules. In this scenario, chondrules and their diversity should result from various degrees of interaction of the ejected fragments with the impact vapor plume; the most oxidizing conditions recorded in type IIA chondrules being very likely the closest to those imposed by the impact vapor plume.

Reference
Villeneuve J, Libourel G, Souliéa C (2015) Relationships between type I and type II chondrules: Implications on chondrule formation processes. Geochimica et Cosmochimica Acta (in Press)
Link to Article [doi:10.1016/j.gca.2015.03.033]

Copyright Elsevier